1-877-463-8256

Just Right


CONTACT

CUSTOM FASTENERS OPTIONS

Too Loose

INSTALLATION HELP

Thread

HEAD OFFICE

Fastener Drilling Recommendations

#10

#14

#17



Copyright 2019

1/4" Hex

5/16" Hex

3/8" Hex

Phillips

Pancake

​Wafer

​Nylon Hex

​Other



TF: 1-877-463-8256

FAX: 1-780-955-8636

EMAIL: orderdesk@versaframe.ca

Size

2806-5th Street

Nisku, AB, CAN

T9E 0H1

Too Tight

.75" to 6" Lengths



Head Types

CUSTOM FASTENERS

With the proper tools, fastener installation is an easy process.  Standard drills and the right size socket bit (3/8" hex, 5/16" hex, 1/4" hex) is all thats required.  Impact drills are not recommended for drilling fasteners as they often cause paint chipping on the fastener head itself.   Although common practise, VerseaFrame does not recommend pre drilling sheets in bundles as hot burs created from the drilling process can embed into the paint finish of your steel panel.  These hot burs will rust when in contact with moisture, creating a rusting appearance around the areas that were pre drilled.  If pre drilling bundles, it is important to install sheets immediately and wipe away any metal filings or burs that embed on the sheet.

In addition to our stock lines of metal to wood, metal to metal and clip fasteners, VersaFrame Inc can supply custom fasteners in a variety of sizes and lengths.  We deal with some of the leading fastener manufacturers in the industry and if you require something we don't stock then we will work hard to find it for you.  Fasteners come in a variety of head sizes/types, thread widths, lengths and even in head options other then steel.  Feel free to ask any of our sales locations for more information on custom fastener requirements and options.