The JSM standing seam panel is a high end steel roofing profile. It's hidden fastener system provides a desired aesthetic appeal. Standing Seam is available in 22 gauge to 26 gauge material in bare agalume or a wide variety of colours.
The unidesigned clip fastening system allows for each panel to cover up the fastening of the panel laid previous, providing a fantastic looking roof that wows even the most critical judge of residential and commercial design.
Standing seam panels can be curved to further increase their appeal. Curved standing seam panels are available in 22 gauge and 24 gauge with a 1-1/2" rib height.
* Colours are a guideline only and may appear different on different screens, contact your nearest branch for more accurate colour samples.
The Standing seam panel is relatively easy to install. Simply lay your first sheet on the
opposite end of your building of the prevailing winds and follow that by placing your clips then the next sheet in place. Using a hand or power seamer, seam the lap for a weathertight finish. For more in depth installations advice on panels, flashing and
accessories, download/print our installation guide to the right.
26 Gauge Colour Chart
Hidden Fastener Panel Installation Guide
Nisku, AB, CAN
Standing Seam Spec Page
24 Gauge Colour Chart
* Orange available in 29 gauge only