#10x1"

#10x1.5"

​#10x2"

Head Type

HEX Head

250

Plain

Call for Availability

Wood Fasteners

1/4" Hex

1/4" Hex

1/4" Hex

Stocked Locations

250

#10-9 x 1-1/8"


Profile/Part

All

All

​All

Plain

All

All

All

All

Too Loose

Call for Availability

   3/8" Hex

Master Gripper #14 x __"

 1-877-463-8256

Stock & Custom Order Sizes Available

Min Qty.

Colors

Pre drilling sheets in bundles is not recommended as hot burs created from the drilling process can embed into the paint finish of your steel panel.  These burs will rust when in contact with moisture, creating a rusting appearance on your steel panel.


Impact drills are not recommended for drilling fasteners as they often cause paint chipping on the fastener itself.

500

250

250

250

Truss Head (Wafer)

#8 x 9/16"

#8 x 1"

   Phillips

#17x1.5"

Call for Availability

All

​Call for Availability

#14x1"

#14x1.25"

#14x1.5"

#14x2"

Our line of metal to wood fasteners are designed to provide superior holding strength when attaching metal roofing and siding to wood frames and plywood. 

Wood fasteners are widely used for agricultural and residential metal roofing and siding applications.

Fasteners are available in a variety of head sizes, thread widths and lengths.  See below for a full listing of our stock fastener sizes or call any of our branches for availability on specialty or non stock sizes.

Just Right

Call for Availability

HOME   |   CONTACT   |   REQUEST A QUOTE

METAL ROOFING & METAL SIDING

All fasteners, with exception to pancake and wafer screws, include a neoprene washer.

Call your nearest manufacturing/sales branch for stock and availability.

Phillips Truss (Wafer) Head

3/8" Hex

3/8" Hex

3/8" Hex

3/8" Hex

#14x1"

#14x1.25"

#14x1.5"

#14x2"

Install  Recommendations.............

Phillips Pancake Head

500

250

250

250

Master Gripper #10 x __"

   Phillips

Master Gripper #17 x __"

​(Goof Screw)

Too Tight

Commonly Used Metal Roofing and Siding Fasteners

MG# 10 x __" - Used for attaching metal panel or flashing to a wood substrate

MG# 14 x __" - Used for attaching metal panel or flashing to a wood substrate

MG# 17 x __" - used when #10 or #14 fasteners need to be removed and replaced,  

                          wider thread allows it to bite into wood in holes previously occupied

                          by #10 or #14 screws

Pancake Head - Used with panel clip system when attaching to plywood substrate

Thread/Length

Plain

Pancake Head